Signal Parakeet


 

Entry level product that has 3.5”(85mm) touch screen. Screen access to six signal combinations.
Simbuck Generators are stand-alone systems designed to mimic feature sets of input signals to Electronic Control Units, thereby coercing the firmware to execute on the engineer’s desk.
Simbuck Signal Parakeet has the same core output capabilities as Signal Parrot and a 3.5″ screen supporting targeted mimics to exercise individual feature sets.

  • Runs stand-alone, no PC required
  • Onboard storage of multiple target system configurations
  • Dynamic selection of output values via intuitive touchscreen interfaces
  • Symmetric and asymmetric Pulse Stream signals
  • Additional Analog, Digital, Frequency and PWM signals output in parallel
  • CAN supported

 
long-button

DATA INFORMATION

Type Signal Range
Primary Signal #1 Asymmetric Pulse Stream 0 – 10kHz; 0 – 100%; 0 – 5V
3 x Digital Asymmetric Pulse Stream 0 – 10kHz; 0 – 100%; 0 – 5V
2 x PWM Complementary PWM 4kHz – 10kHz
3 x PWM Variable PWM base frequency 1kHz – 100kHz, 0 – 5V
2 x PWM Low frequency PWM 1hz – 1 kHz
4 x Digital Volts 0 – 5V
Comms CAN Standard baud rates 
Comms Serial Standard baud rates
Comms USB USB 1.1, USB2.0

OUTPUTS

Signals conditioned
  • Pass Through PWM-Analog from uLCD35 Display
  • PWM
  • Frequency
  • Digital
  • Pulse Stream (example #1)
    • 0 - 1.66kHz (Crankshaft)
    • 0 - 1.66kHz (Camshaft#1)
    • 0 - 1.66kHz (Camshaft#2)
    • 0 - 1.66kHz (Tachometer)
  • Pulse Stream (example #2)
    • QE Channel A
    • QE Channel B
    • QE Channel C
  • Pulse Stream (example #3)
    • 500 Hz
    • 1 kHz
    • 2.5kHz
    • 1 kHz

DIGITAL OUTPUTS

Subject to configuration. Different configurations available on request.

Type Signal Range
Primary Signal #1 Asymmetric Pulse Stream 0 – 10kHz; 0 – 100%; 0 – 5V
3 x Digital Asymmetric Pulse Stream 0 – 10kHz; 0 – 100%; 0 – 5V
2 x PWM Complementary PWM 4kHz – 10kHz
3 x PWM Variable PWM base frequency 1kHz – 100kHz, 0 – 5V
2 x PWM Low frequency PWM 1hz – 1 kHz
4 x Digital Volts 0 – 5V
Comms CAN Standard baud rates
Comms Serial Standard baud rates
Comms USB USB 1.1, USB2.0

ANALOG OUTPUTS

 

Type Number of Signals Range
Voltage 6 0 – 5V